indesit wia111

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › indesit wia111

Viewing 15 posts - 1 through 15 (of 27 total)
1 2
  • Author
    Posts
  • February 24, 2009 at 5:32 pm #43714
    seanmfc
    Participant

    hi all

    i have the above machine and when you turn the machine off the red light keeps flashing and never goes off i have tried what the book said (unplug from the main wait 45 secs the try again)

    anyone any ideas

    thanks 🙁

    February 24, 2009 at 7:03 pm #278249
    iadom
    Moderator

    Re: indersit wia111

    Does it work normally when in use?

    February 24, 2009 at 8:05 pm #278250
    helo_75
    Participant

    ooooh

    thats common fault that

    it needs a new board.. eprom if you can still get one, maybe a card

    emw will supply one ready programmed

    February 24, 2009 at 8:06 pm #278251
    helo_75
    Participant

    its the one with the board at the top jim
    😀

    February 24, 2009 at 8:37 pm #278252
    seanmfc
    Participant

    Re: indersit wia111

    the machine works fine

    February 24, 2009 at 8:45 pm #278253
    helo_75
    Participant

    its been noted about these machines doing that before

    the selector is faulty, and is part of the board

    it may well function correctly, but you have NO IDEA what programme it is actually on.. it could be boiling your clothes

    the pcb needs replacing

    February 25, 2009 at 2:00 pm #278254
    seanmfc
    Participant

    Re: indersit wia111

    thanks all for your help anyone know where to get a board from and how much

    cheers

    February 25, 2009 at 2:55 pm #278255
    don
    Moderator

    Re: indersit wia111

    An email to spares@ukwhitegoods.co.uk should get a response.

    Don

    February 25, 2009 at 3:56 pm #278256
    helo_75
    Participant

    only ull , need a pcb, smart card, smartcard reader AND a low end adaptor

    http://www.emwelec.co.uk/

    may be able to help

    February 25, 2009 at 4:47 pm #278257
    Tony_EMW
    Participant

    Re: indersit wia111

    In stock at £39.90+vat with eprom fitted and programmed up ready to fit to the machine. http://www.emwelec.co.uk

    February 25, 2009 at 7:51 pm #278258
    seanmfc
    Participant

    Re: indersit wia111

    tony

    if i buy this and its not the problem do i get my money back

    regards

    sean

    February 25, 2009 at 8:08 pm #278259
    helo_75
    Participant

    but it is your problem

    trust me

    February 25, 2009 at 8:37 pm #278260
    kiddo66
    Participant

    Re: indersit wia111

    I will second Helo on that.(i work for Indesit)

    February 25, 2009 at 9:32 pm #278261
    seanmfc
    Participant

    Re: indersit wia111

    kiddo66

    are you saying that is the answer to my problem a new pcb board

    cheers

    February 25, 2009 at 9:48 pm #278262
    helo_75
    Participant

    H
    E
    L
    L
    O

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 27 total)
1 2
  • You must be logged in to reply to this topic.