BOSCH SGS43E02GB/43 – Faulty

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › BOSCH SGS43E02GB/43 – Faulty

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 25, 2009 at 7:32 pm #43754
    fisheggs
    Participant

    Hi All,

    I have the above machine for a few years and have a problem in that it turns on but makes clicking noises and doesnt fill.

    I took the control panel out and found it too be fried on a relay contact so requires a new module at around £100.


    Question is – is it worth replacing or just renew the machine. I changed the door panel a few months ago and now this – Just wondering what could be next?

    Look forward to your replies.

    BTW basic Bosch dishwashers start at around £270 – hence the question!

    February 26, 2009 at 2:01 pm #278465
    DaveTheOgre
    Participant

    Re: BOSCH SGS43E02GB/43 – Faulty

    Not sure Bosch shall be a good replacement. Our SGS43T52GB/21 appears to have a heater unit fault after only 2½ years (best part of £100 for replacement part).

    I’ve been considering Zanussi / Electrolux as alternatives at around the same price of £270, but no idea whether they are likely to be more reliable.

    Best of luck getting a more useful answer to your question.

    February 26, 2009 at 7:55 pm #278466
    Penguin45
    Participant

    Re: BOSCH SGS43E02GB/43 – Faulty

    If it’s a burnt out solder joint, re-solder it. Free!

    Penguin45.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.