aeg w/m no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg w/m no go

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 28, 2009 at 10:32 am #43837
    bzz67
    Participant

    lavamat 72630w 91400209601
    machine appears to be totally dead, not even display. i did get the door to lock at one point but nothing else. iam guessing main module but there is that that control board as well. tried new door lock just to rule it out.
    any help on this would be good as its a bit of a treck back to the house.

    February 28, 2009 at 11:09 am #278751
    Martin
    Participant

    Re: aeg w/m no go

    Best to take out the main power module and check for blown tracks?:idea:

    I had a same symptoms on a similar AEG 2 weeks back and the module had blown, caused by a duff interlock!

    February 28, 2009 at 11:16 am #278752
    bzz67
    Participant

    Re: aeg w/m no go

    sorry forgot to mention checked both boards, no signs or any problems.
    insutation ok.

    February 28, 2009 at 11:31 am #278753
    Martin
    Participant

    Re: aeg w/m no go

    Looking at the wiring diagram (on TDS Disk…have you got a copy?) I guess you’ll need to trace that 240v goes direct to the Pressure switch as well as the selector switch on the front board. And check from there? 😕

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.