Gorenje Gv60010

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Gorenje Gv60010

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 2, 2009 at 8:42 pm #43895
    ray.t
    Participant

    Hi, I have been to one of these today with an error code E4.
    I have checked to see that it has operated the aquastop switch and the base of the machine had quite a bit of water in it.
    I have now removed the water and tested it and the machine will only take a very small amount of water before the heater comes on.
    So It seems that the machine has over filled and now its under filling.
    Can the pressure switch cause this fault?
    One other thing I noticed was that the time left on the display was jumping up and down from 18 to 19 mins
    Cheers, Ray

    March 2, 2009 at 8:50 pm #278949
    admin
    Keymaster

    Re: Gorenje Gv60010

    Hi

    The normal cause for the base flood is a faulty motor.This may cause water to into the pressure switch,Take it off and dry it out and try again.

    The time as you call it isnt a time..its a temprature guide 18oc to 19oc

    Bryan

    March 2, 2009 at 8:56 pm #278950
    ray.t
    Participant

    Re: Gorenje Gv60010

    Ok thanks very I will try that.
    Cheers, Ray

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.