Neff T/dryer belt fit help reqd.

This topic has 6 replies, 3 voices, and was last updated 17 years, 1 month ago by Martin.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
March 4, 2009 at 12:19 pm #43942

Martin
Participant

I’ve got a Neff R4381X1GB/01 where the drive belt is broken and I’m not at all sure how to access the drive shaft to replace it?

Does the front fan have to come off in order to slide the belt along the shaft? Or maybe both fans removed and the motor taken out of the fan housing at the back?

Any assistance would be much appreciated. 😀

March 4, 2009 at 1:44 pm #279162

superfix
Participant

Re: Neff T/dryer belt fit help reqd.

I assume you mean the small belt

Remove front fan, wiring to motor and “handle” that holds it in place, note the position of the motor BTW.

Then everything pulls out towards the back. Nice and easy job really.

March 4, 2009 at 1:58 pm #279163

Martin
Participant

Re: Neff T/dryer belt fit help reqd.

Yes indeed the small belt is required. Thanks Superfix for the advice there I will give it a go. Just one more question….the pulley on the shaft with what appears to be a allen screw fixing…I don’t need to touch that then?

March 4, 2009 at 2:16 pm #279164

superfix
Participant

Re: Neff T/dryer belt fit help reqd.

IIRC, no need to touch the pulley at all.

March 4, 2009 at 5:00 pm #279165

Martin
Participant

Re: Neff T/dryer belt fit help reqd.

Cheers for that.:tup:

March 4, 2009 at 6:39 pm #279166

nomadPaul
Participant

just remember that the rear cover plate has to be removed to allow the motor/rear fan blade to be slid back enough to allow the front of the shaft to come free.

March 11, 2009 at 1:58 pm #279167

Martin
Participant

Re: Neff T/dryer belt fit help reqd.

A big thanks to superfix and nomadPaul for the help on this one. I fitted the belt today with ease….Thanks again guys! 😀
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.