hotpoint tdc62 dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint tdc62 dryer

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 5, 2009 at 8:27 am #43972
    suedehead1
    Participant

    hi,
    i changed the thermostat kit and 2 days later it was gone again,
    after carefull examination the heater is still on when the machine is off,
    ie. when the timer clicks back to zero the element glows red hot until you open the door.
    i only noticed cause i could see it glowing through the screw holes for the drum shaft cover.
    obviosly this is dangerous and i would welcome any advice thanks.

    March 5, 2009 at 8:44 am #279267
    Martin
    Participant

    Re: hotpoint tdc62 dryer

    Dryness module heater relay jammed…..New dryness module methinks. 🙁

    March 5, 2009 at 8:21 pm #279268
    suedehead1
    Participant

    Re: hotpoint tdc62 dryer

    thanks for the reply i wll try one.

    March 5, 2009 at 10:28 pm #279269
    iadom
    Moderator

    Re: hotpoint tdc62 dryer

    suedehead1 wrote:thanks for the reply i wll try one.

    Are you sure, £87 ex vat list price and EMW,QER etc do not repair these. 😥

    Martin is spot on BTW. 😉

    Jim.

    March 5, 2009 at 10:30 pm #279270
    suedehead1
    Participant

    Re: hotpoint tdc62 dryer

    i dont think i will bother i didnt realise it was that expensive thanks for the advise another one bites the dust.

    March 6, 2009 at 1:25 am #279271
    leavemetogetonwithit
    Participant

    Re: hotpoint tdc62 dryer

    Never seen one of these but if it’s just a jammed relay, it shouldn’t be too difficult to repair ❓ . RS, Maplin, CPC – one of them has probably got suitable replacements.
    Mike.

    March 6, 2009 at 10:02 am #279272
    iadom
    Moderator

    Re: hotpoint tdc62 dryer

    I spoke to Tony at EMW and he said that they found the microprocessor corrupted most of the time , thats why they don’t repair them.

    I don’t suppose you would have anything to lose by trying a relay though.

    Jim.

    March 7, 2009 at 10:56 am #279273
    suedehead1
    Participant

    Re: hotpoint tdc62 dryer

    thanks for the replies i will give the relay a go.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.