Zanussi TCE7276w dryer – UK Whitegoods

This topic has 10 replies, 2 voices, and was last updated 17 years, 1 month ago by maltheviking.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
March 12, 2009 at 11:22 am #44159

maltheviking
Participant

Having a bit of a problem with this model.

Found that the push button diffuser was broken as usual, ordered a new one which has been superceeded from 1251185300 to 1257429306
When fitted to the PCB it will not operate the tactile switches due to the fact that there is an 3-4mm gap between the switch and the diffuser 😕 it looks as if there should be another part to fit in between the two possibly a rubber diaphram 😕 . Anyone shed any light on this please.

Wholesalers haven’t a clue as “computer say no” 😥 😥 😥
Mal

March 12, 2009 at 11:39 am #279988

Martin
Participant

Re: Zanussi TCE7276w dryer

There’s 4 different diffusers fitting 4 different TCE7276W dryers so the PNc number would help to identify the correct one for you Mal 😉

March 12, 2009 at 3:49 pm #279989

maltheviking
Participant

Re: Zanussi TCE7276w dryer

Martin wrote:There’s 4 different diffusers fitting 4 different TCE7276W dryers so the PNc number would help to identify the correct one for you Mal 😉

PNC 91609266703, part comes up as 1251185300
on my TDS 😕

March 12, 2009 at 5:08 pm #279990

Martin
Participant

Re: Zanussi TCE7276w dryer

maltheviking wrote:PNC 91609266703, part comes up as 1251185300
on my TDS 😕

Did you not read the ‘Service Bulletin’ on your TDS about the Light Diffusers Mal?

March 12, 2009 at 5:34 pm #279991

maltheviking
Participant

Re: Zanussi TCE7276w dryer

Martin wrote:

maltheviking wrote:
PNC 91609266703, part comes up as 1251185300
on my TDS 😕

Did you not read the ‘Service Bulletin’ on your TDS about the Light Diffusers Mal?
Got me there me old pal 😳 I don’t seem to a have a bulletin about them on my disk, tis last years though. Would you care to enlighten me please Martin 😉

March 12, 2009 at 5:42 pm #279992

Martin
Participant

Re: Zanussi TCE7276w dryer

I’ll email you that bulletin….meanwhile you have the part number correct but the diffuser comes in 2 parts…maybe the front bit you mentioned is missing in your case?

Check your email….

Cheers!

P.s …Oh sod it….you don’t show your email address….so sent me one instead…OK?

March 12, 2009 at 5:49 pm #279993

maltheviking
Participant

Re: Zanussi TCE7276w dryer

Martin wrote:
P.s …Oh sod it….you don’t show your email address….so sent me one instead…OK?

On its way 😀

March 12, 2009 at 6:01 pm #279994

Martin
Participant

Re: Zanussi TCE7276w dryer

Sorted….catch you later…. 😉

March 12, 2009 at 6:26 pm #279995

maltheviking
Participant

Re: Zanussi TCE7276w dryer

Martin wrote:Sorted….catch you later…. 😉

Oh no you can’t get away that easy :rolls: bet you wish that you never replied 😉
The part i have has both bits, have a look
http://i127.photobucket.com/albums/p148 … ffuser.jpg

March 13, 2009 at 8:39 am #279996

Martin
Participant

Re: Zanussi TCE7276w dryer

maltheviking wrote:Oh no you can’t get away that easy :rolls: bet you wish that you never replied 😉

All part of the service Mal. 8)

I can only think that perhaps (perhaps???) very careful location of the 2 part diffuser is required to close that 3-4mm gap?….. 😕 🙁

March 13, 2009 at 10:03 am #279997

maltheviking
Participant

Re: Zanussi TCE7276w dryer

It’s wierd really, when the diffuser is fitted to the front panel all is well, you press button on the console and it has direct contact with the diffuser (white part) ., the problem lies with the white plastic insert as it can only be pushed as far as the clear diffuser, 3-4mm short of hitting the tactile switches 😥
I have given the local Servicefoce a ring as I know a couple of the boys there.
Keep everyone updated if I get a result.
Thanks Martin 😉
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.