- This topic has 3 replies, 2 voices, and was last updated 17 years, 1 month ago by
.
-
Posts
-
Our creda concept solarplus 48349 dual grill has stopped working, though the fan runs when the regulator is turned on, there is no heat on either setting, i have tested the grill for continuity & it is ok so suspect that it is the regulator at fault, I think the part No is 6204036? but Iwould like to confirm that it is the same as that fitted, how do I gain access to the regilator to check & replace it please?
Re: creda concept solarplus 48349 dual grill
That is the old GDA part number, correct part now is a C00229540.
There is a very strong possibility that any replacement will be from a different manufacturer, it will have some different terminal numbers and it will not have a wiring information sheet with it.
Access is not easy, side panels off, hob released and lifted back, all knobs and front facia removed etc.
Jim.
Re: creda concept solarplus 48349 dual grill
Thanks for that, will you be able to assist with new terminal info or are the new terminals in the same configuration & just numbered differently?
Re: creda concept solarplus 48349 dual grill
Sorry, forum rules, rule 8 in particular apply. 😥
- You must be logged in to reply to this topic.