Hotpoint DWF50 door seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint DWF50 door seal

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 20, 2009 at 4:11 pm #44401
    timdowning
    Participant

    Can someone see if there are two different upper seals for this model.

    I fitted C00141317 and found it to be a couple of inches shorter than the
    original.

    Also can you get the lower seal??

    Cheers.

    March 20, 2009 at 4:19 pm #280868
    iadom
    Moderator

    Re: Hotpoint DWF50 door seal

    Thats the correct part number, AFAIK the lower seal is part of the door. 😥

    Jim.

    March 30, 2015 at 3:07 pm #280869
    cornwell40
    Participant

    Re: Hotpoint DWF50 door seal

    I know this is an old thread but wondering if another seal is available for this machine as c00141317 is about 3″ too short either side( or 6″ on one side;-))

    March 30, 2015 at 3:18 pm #280870
    iadom
    Moderator

    Re: Hotpoint DWF50 door seal

    No, that is still the only one listed.

    March 30, 2015 at 3:29 pm #280871
    cornwell40
    Participant

    Re: Hotpoint DWF50 door seal

    Cheers Jim, must’ve been wearing me magnifying glasses too, it’s about 1″ shorter either side B-/

    March 30, 2015 at 3:45 pm #280872
    iadom
    Moderator

    Re: Hotpoint DWF50 door seal

    That extra inch makes all the difference. 😈

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.