Bosch Dishwasher SGS43E02gb/35

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch Dishwasher SGS43E02gb/35

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 23, 2009 at 6:58 am #44452
    johnnyhoz
    Participant

    This is my first Bosch Dishwasher repair and I have to fit an Instantaneous water heater unit, can anyone give me some guidance on the procedure.

    Thanks

    John

    March 23, 2009 at 8:40 am #281015
    clivejameson
    Participant

    Re: Bosch Dishwasher SGS43E02gb/35

    First of all do a good search through the forums, there have been loads of posts about these…they aren’t difficult but do allow yourself plenty of time. Essentially you need to separate the tub from the plastic base to get access to the heater so you need to remove all the exterior panels, disconnect the door hinge strings (they just lift off), remove the 4 screws that secure the base.
    A good tip is to use plenty of soap on the hose connections when reassembling 😉

    March 23, 2009 at 8:49 am #281016
    Martin
    Participant

    Re: Bosch Dishwasher SGS43E02gb/35

    johnnyhoz wrote:can anyone give me some guidance on the procedure.

    Read this: –
    😉

    http://www.ukwhitegoods.co.uk/modules.p … 73&start=0

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.