Diplomat ADP 8352.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat ADP 8352.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 25, 2009 at 5:26 pm #44516
    delahart
    Participant

    I have read a previous post on this but it didn’t really answer question!
    This built in slimline dishwasher (Haier, looks like Indesit) had base flooded and motor is electrically leaky. I,m hoping it’ll dry out as it hasn,t had time to get rusty!
    When turned on the salt light is on but no program lights appear. Can the board be reset or is it bu**ered.
    Any thoughts appreciated,
    Delahart.

    March 25, 2009 at 7:35 pm #281260
    Jonah
    Participant

    Re: Diplomat ADP 8352.

    Nearest skip forthwith 😯 worst appliance ever made in my humble opinion, the only one reason I was glad MFI went bust was to never work on one again, yep the main PCB & wash pump will need to be replaced and then it will leak again in a couple of months and do the same.

    March 25, 2009 at 9:05 pm #281261
    eastlmark
    Moderator

    Re: Diplomat ADP 8352.

    IME any water related earth leakage can blank the lights and all functions, often to re-appear once all dried out.

    March 26, 2009 at 8:44 am #281262
    delahart
    Participant

    Re: Diplomat ADP 8352.

    Thanks guys, will get the hairdryer out and keep a hammer on the side just in case.
    Delahart.

    March 26, 2009 at 10:41 am #281263
    triphop27
    Participant

    Re: Diplomat ADP 8352.

    Hi

    Had same prob with adp8342 recently.
    Filled salt to get rid of that light and held down prog button as I turned power on, release it quickly or it goes into some sort of test mode, and that seemed to reboot it.

    Would have binned it but was for a good customer of mine so had to make an effort

    John

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.