BOSCH WFL2260UK/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BOSCH WFL2260UK/04

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 26, 2009 at 5:33 pm #44546
    rocker
    Participant

    No cold water in when set on wash cycle although fills cold water on woolens, traced fault to positive feed from facia pcb. will this mean new board or does anyone know if it can be repaired.

    Cheers John.

    March 26, 2009 at 6:07 pm #281377
    gegsy
    Participant

    Re: BOSCH WFL2260UK/04

    Probably the triac has blown that feeds that valve.
    If you can trace it back from the valve to the faulty triac ,Im sure you can just solder a new one in 😀

    Greg

    March 26, 2009 at 6:50 pm #281378
    rocker
    Participant

    Re: BOSCH WFL2260UK/04

    Greg, have a very limited knowledge of electronics, I have traced back to a small unit with 3 legs one side and a wider single leg the other is this a triac.
    John

    March 26, 2009 at 9:26 pm #281379
    leavemetogetonwithit
    Participant

    Re: BOSCH WFL2260UK/04

    That sounds like a surface mounted triac. Rather fiddly soldering job if you’ve got to do that.
    💡 Maybe EMW would have a dekko at it for you if you gave them a ring. I’m sure they did a Bosch board for me about 3 years ago.
    I’ve not had many problems with Bosch washing machine boards but several water valve problems. I’d swap the coil just to make sure. Even the ones with the mini pcb can be unplugged from that IIRC.
    Mike.

    March 26, 2009 at 9:32 pm #281380
    rocker
    Participant

    Re: BOSCH WFL2260UK/04

    Mike, yes its a surface mounted triac as you say, it looks difficult to do,will ask Tony at emw.

    cheer John.

    March 26, 2009 at 9:39 pm #281381
    leavemetogetonwithit
    Participant

    Re: BOSCH WFL2260UK/04

    Also, if the triac is blown, it might be better to replace the valve anyway, in case that’s what blew it. I’ve got away with using a cheap Hotpoint double valve a few times by remaking connections and drilling a new fixing hole or two for the screw(s).
    Mike.

    March 26, 2009 at 9:49 pm #281382
    rocker
    Participant

    Re: BOSCH WFL2260UK/04

    Mike, I will do that if the board is repaired, thanks for the advice.
    cheers John

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.