Hoover HNWF7148

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HNWF7148

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • March 31, 2009 at 7:45 pm #44671
    Specialist01269
    Participant

    Hi all: Done a search on this model number but only came up with whats on the DIY forum. Anyone got any info on these please, have 1 to go to that apparently went pop & cust says now thing it does is flash all LED’s have a nasty feeling the PCB has blown, never come across 1 so any info appreciated. 😕
    Andy.

    March 31, 2009 at 7:48 pm #281892
    Penguin45
    Participant

    Re: Hoover HNWF7148

    Count the pattern of the flashes over a 15 second period to get the error code.

    Chris.

    March 31, 2009 at 8:10 pm #281893
    Specialist01269
    Participant

    Re: Hoover HNWF7148

    Thanks Chris: Do all the front LED’s flash to give the error code? I haven’t actually seen the machine but the way the customer made it sound there are a few which all flash, forgot to say the door doesn’t lock either. Are the error codes the same as the Nextra codes or are they more advanced again 😕
    Andy.
    Spoke to customer again, she says that all front lights flash as soon as machine is switched on at wall socket.

    March 31, 2009 at 11:26 pm #281894
    Penguin45
    Participant

    Re: Hoover HNWF7148

    As far as I’m aware, they’re the same as the Nextra codes.

    Chris.

    April 1, 2009 at 12:17 am #281895
    helo_75
    Participant

    its common for the lock to blow the pcb by the way 😉

    April 1, 2009 at 7:50 am #281896
    Specialist01269
    Participant

    Re: Hoover HNWF7148

    Thanks guys: Unfortunately can’t see the machine until next tuesday but will let you know what happens. 🙂
    Andy

    April 7, 2009 at 9:35 pm #281897
    Specialist01269
    Participant

    Re: Hoover HNWF7148

    Hi All: Just to finish this 1 off, went to look at it today & got a bit of a surprise. Interlock melted, burnt wiring & a fried pcb, looks nice from the outside though. Customer decided not to bother with repair & then had hell getting my money out of her until I mentioned court action.
    Would still like a CCT or manual if anybody has one.
    Thanks: Andy

    April 8, 2009 at 7:49 am #281898
    Martin
    Participant

    Re: Hoover HNWF7148

    Specialist01269 wrote:Would still like a CCT or manual if anybody has one.

    What’s your email address?

    April 8, 2009 at 8:56 am #281899
    Specialist01269
    Participant

    Re: Hoover HNWF7148

    Hi Martin: restorer@tesco.net
    Is this the usual sort of thing with these machines ❓ haven’t seen 1 this badly burned for quite a while & never a Hoover, Hotpoint / Indesit yes.
    Having said that I have never worked on this model before.
    Thanks: Andy

    April 8, 2009 at 10:48 am #281900
    Martin
    Participant

    Re: Hoover HNWF7148

    Specialist01269 wrote:Is this the usual sort of thing with these machines 😕

    Shall we say it’s not the first time this has happened to Hoover m/c’s. 😉

    Check your email by the way….. 😀

    April 8, 2009 at 3:23 pm #281901
    Specialist01269
    Participant

    Re: Hoover HNWF7148

    Thanks Martin, I know what to look out for in the future. Thanks also for the excellent information 8) 😀
    All the best: Andy

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.