WF740

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WF740

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 7, 2009 at 12:18 pm #44830
    wilf
    Participant

    customer reports machine fills for a short burst then shows H20 I’ve looked in search and found a similar thread but couldnt see any end result. anyone seen this or got any ideas before I call as its a few miles away

    wilf

    April 7, 2009 at 1:26 pm #282508
    Washman
    Participant

    Re: WF740

    Hi
    ——————————————————————————–
    .
    H20 – Time out – fill (taps) check inlet valves and pressure chamber

    Mike

    April 7, 2009 at 2:51 pm #282509
    wilf
    Participant

    Re: WF740

    that was my first thought. I’ll let you know what I find

    wilf

    April 8, 2009 at 10:09 am #282510
    wilf
    Participant

    Re: WF740

    update on this just seen the machine plug to one of the valves burnt out valve tested ok so connected the leads straight on to the valve lost the fault code but still no fill on that valve. looks like its taken the board out. customer didnt want to go any further.

    wilf

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.