AEG induction hob.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG induction hob.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 8, 2009 at 10:45 pm #44879
    aqualectric
    Participant

    I have to go to an AEG induction hob tomorrow; lights go on but no heat. How hard are they to work on? I know this is a long shot, but, any ideas what is likely to be wrong or what to look / test for? I haven’t looked at one before, but past postings suggest they are a nightmare……. 🙁

    Any help please!!

    Steve.

    April 8, 2009 at 11:20 pm #282765
    Penguin45
    Participant

    Re: AEG induction hob.

    Hi Steve,
    From what I can see, it’s bad wiring, bad ventilation or bad pcbs. Got a model number?

    Chris.

    April 9, 2009 at 7:41 am #282766
    nigegt
    Participant

    Re: AEG induction hob.

    Hi

    I know it sounds daft but are they using the right pans? We get people who move into a house with an induction hob and have never used one before ringing us as they wont work (as they have normal pans), Lights up but just flashes.

    Nige

    April 9, 2009 at 8:14 am #282767
    aqualectric
    Participant

    Re: AEG induction hob.

    The right pans being……???? Sorry to seem clueless on this – I know they have to be metal pans, but what type? 😕

    Steve.

    April 9, 2009 at 7:32 pm #282768
    aqualectric
    Participant

    Re: AEG induction hob.

    Well, stripped this hob this morning and the PCB was blown. Distriparts only list the rings and PCB cluster as one complete unit – £934.00 retail. :conf:
    Not really expecting to get the go ahead, methinks…… :rolls:

    Thanks for the advice,

    Steve.

    April 9, 2009 at 8:17 pm #282769
    Phidom
    Participant

    Re: AEG induction hob.

    You can get the individual boards but they are extremely expensive. Hopefully one day someone will start doing a board repair service on these.

    April 13, 2009 at 3:51 pm #282770
    pup
    Participant

    Re: AEG induction hob.

    aqualectric wrote:Well, stripped this hob this morning and the PCB was blown. Distriparts only list the rings and PCB cluster as one complete unit – £934.00 retail. :conf:
    Not really expecting to get the go ahead, methinks…… :rolls:

    Thanks for the advice,

    Steve.
    hi sent back to a.e.g ,how old is it?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.