- This topic has 10 replies, 3 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
displayin fa after few seconds of filling 11 flashes says optical water indicator fault in wee book.is this the fill matrix wi reed switch ?any help guys
Re: diplomat adp8332
yeh but penguin says this model doent have an optical thing .mmm these dw arnt worth the hassel man nightmare plumbing in kitchen two cud be body swerve job 😆
Re: diplomat adp8332
Start with the water indicator in the sump (sludge/microswitch failure). If that doesn’t do it, check out the flow meter in the fill matrix.
Penguin45.
Re: diplomat adp8332
ok went back clean grid not dirty anyway this kitchens a mare. fill hose joined as is cable an drain hose wat {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} it definately beein the fill matrix before order part an take bloody hing oot 😮
Re: diplomat adp8332
Why take it oot? Remove decor door and lower cover plate. Remove plug from indicator, throw in a pan full of water and see if the microswitch has closed. Drain it and see if it’s opened. If it isn’t working, it’s a quarter turn twist fit, which you can do through the gap.
If it’s working, you’ll be looking at the flow meter – then you will have to haul it out.
Chris.
- You must be logged in to reply to this topic.