Zanussi DA 6142 No D/Washer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi DA 6142 No D/Washer

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • May 8, 2009 at 9:19 am #45551
    a1al
    Participant

    Hi Everyone

    Have been out to this D/Washer it completes cylce but does not heat water at all, heater tested ok (26 omhs) water level switch on heater circuit seems to be ok and tested for broken cables.

    Anyone any ideas, or know of any common faults on this model

    Prod No 911911007/01

    Model DA6142

    Thanks a1al

    May 8, 2009 at 2:04 pm #286114
    pup
    Participant

    Re: Zanussi DA 6142 No D/Washer

    HI
    has it got pcb in front to select program ,if so it faulty send it to tony @emw.

    May 9, 2009 at 9:54 am #286115
    Jazzmeister
    Participant

    Re: Zanussi DA 6142 No D/Washer

    As above..common fault with theses is for the heater relay on the main pcb to blow its’ solder…check the board and all joints on the relays!

    Jazz

    May 10, 2009 at 8:12 pm #286116
    silverbroom
    Participant

    Re: Zanussi DA 6142 No D/Washer

    Repaired many of these pcb’s with the good old solder iron, it’s worth a try if that’s where the problem is.


    silverbroom

    May 11, 2009 at 10:13 am #286117
    a1al
    Participant

    Re: Zanussi DA 6142 No D/Washer

    Hi everyone

    Thanks for the replies.
    This one does not have PCB, its has mechanical timer unit

    a1al

    May 11, 2009 at 10:55 am #286118
    LJDomestics
    Participant

    Re: Zanussi DA 6142 No D/Washer

    Is it possible your reading through something else?

    May 11, 2009 at 11:18 am #286119
    a1al
    Participant

    Re: Zanussi DA 6142 No D/Washer

    Not sure what you mean LJ

    May 11, 2009 at 1:52 pm #286120
    maltheviking
    Participant

    Re: Zanussi DA 6142 No D/Washer

    a1al wrote:Hi Everyone

    Have been out to this D/Washer it completes cylce but does not heat water at all, heater tested ok (26 omhs) water level switch on heater circuit seems to be ok and tested for broken cables.

    Anyone any ideas, or know of any common faults on this model

    Prod No 911911007/01

    Model DA6142

    Thanks a1alAint got an in line safety stat. has it?
    PM me with your email and il’l send you some goodies 😉

    May 11, 2009 at 3:43 pm #286121
    a1al
    Participant

    Re: Zanussi DA 6142 No D/Washer

    I dont think it has an inline saftey stat

    Have sent my email via PM many thanks

    a1al

    May 11, 2009 at 8:23 pm #286122
    maltheviking
    Participant

    Re: Zanussi DA 6142 No D/Washer

    a1al wrote:I dont think it has an inline saftey stat

    Have sent my email via PM many thanks

    a1alBuilt in the heater.
    sent you the goodies that I have 😉

    May 11, 2009 at 8:28 pm #286123
    a1al
    Participant

    Re: Zanussi DA 6142 No D/Washer

    Thanks Mal

    Info should help me sort it
    a1al

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.