Smeg WMI 16AAA

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg WMI 16AAA

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 11, 2009 at 3:52 pm #45630
    RickT
    Participant

    Hi
    Fault on this one is continuous pump action, even before pressing programme start. So in programme mode it fills and emptys at the same time (E2 fault) . Have disconnected aquastop in base, still no joy. Could it be module? Any clues appreciated.

    May 11, 2009 at 8:13 pm #286410
    RickT
    Participant

    Re: Smeg WMI 16AAA

    Anyone??

    May 11, 2009 at 10:26 pm #286411
    eastlmark
    Moderator

    Re: Smeg WMI 16AAA

    not a known problem but form your description sounds like a blown pump triac on the board. Is it starting as soon as the power/selector is turned even before the start button is pressed? Have had some dangling wires leading to the float swtich rubbing through their insulation and shorting against the base in the past but thats a long shot.

    May 12, 2009 at 8:00 am #286412
    RickT
    Participant

    Re: Smeg WMI 16AAA

    Yes. It’s as soon as you switch on and before you start programme. I was thinking it was the triac but I will investigate into the wiring to make sure. Thanks for the info.
    Cheers Rick

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.