- This topic has 4 replies, 2 voices, and was last updated 16 years, 10 months ago by
.
-
Posts
-
My washer dryer is flashing these lights slowly:drying high heat,reduce creases and time saver. It is flashing the on/off light quickly.
This fault appears after trying to start a machine cycle (any).Any help appreciated
Re: Hotpoint wd420G flashing lights
It helps if you give us the lights by number from top down, however there is only one code I can see that uses four lights, is it the top four?
If so then you have an F15 fault. The heater relay on the main PCB is possibly faulty. The Indesit circuit boards on these machines are very flaky indeed.
Due to the ridiculous system the Indesit Company use to programme these PCB’s you would be advised to use your five year parts guarantee or try and source a refurbished module.
Re: Hotpoint wd420G flashing lights
the lights are from the top down:1,2 and 4 . Thanks very much for the exextremely quick reply
Re: Hotpoint wd420G flashing lights
1,2 + 4 suggest high temperature when drying due to possibly blocked condenser, fan failure etc. Should really come on during drying phase.
Sadly a large number of faults on these machines eventually lead back to PCB failure.
- You must be logged in to reply to this topic.