Zanussi D/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi D/W

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 19, 2009 at 2:51 pm #45836
    rocker
    Participant

    The heater has blown and made a hole in the stainless tub, can anyone tell me if there is a metal repair kit / paste ect. can anyone recommend
    one they have used and proved to be good.
    thanks John.

    May 19, 2009 at 3:08 pm #287247
    bzz67
    Participant

    Re: Zanussi D/W

    if its on a flat surface, stainless nut & bolt with washers and rubber washer. ambersil sealant for cooker doors is also good stuff.

    May 19, 2009 at 4:30 pm #287248
    rocker
    Participant

    Re: Zanussi D/W

    hole is in the fold of edge i.e at 90deg angle cant use bolt ect.
    thanks anyway. (there is a metal sealent) don’t know make.

    May 19, 2009 at 5:08 pm #287249
    Madmac
    Participant

    Re: Zanussi D/W

    Your local motor factors will have repair paste suitable for metal, rocker. Most seem to work well ive found.

    May 19, 2009 at 6:12 pm #287250
    Penguin45
    Participant

    Re: Zanussi D/W

    Granvilles PetroPutty works for me……

    Chris.

    May 19, 2009 at 7:10 pm #287251
    rocker
    Participant

    Re: Zanussi D/W

    Chris, were can I buy this. John

    May 19, 2009 at 7:30 pm #287252
    spanner51
    Participant

    Re: Zanussi D/W

    I have used Devcon steel putty with good results

    http://www.lawson-his.co.uk/scripts/pro … {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20Epoxies

    May 19, 2009 at 9:52 pm #287253
    rocker
    Participant

    Re: Zanussi D/W

    thanks for your replys gents. John.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.