- This topic has 3 replies, 2 voices, and was last updated 16 years, 10 months ago by
.
-
Posts
-
fitted diverter valve which cured orig problem
(no water going to lower spray arm)dishwasher is now functioning ok but
now getting a noise every time water is diverted to top spray arm..took of lower / top spray arm pipes to look for obstruction etc, could find anything…
anyone had this fault after fitting diverter…
cheers ally
Re: siemans dishwasher se64a630gb/42
diverter + noise Link is to page two but whole thread may be of interest. Other threads came up using those search terms but I had happy memories of this one 😀 .
Mike.Re: siemans dishwasher se64a630gb/42
cheers, have read post and sent a pm
hopefully will get some info,one things is for sure …changing diverter/heater box is a total ball buster.. 2hours + messing about testing ,
hose werent long enough to alow testing whilst out of cabinet , had to put back into pos, put on prog, take fill hose back of then pull back out…thank god i didnt have one of those customers who hang over the top of you asking if you know what your doing , and is it fixed and whats the part number so i can double check on the http://www...
ally
Re: siemans dishwasher se64a630gb/42
still no luck with this, customer has done about 6 wash,s now and noise still there…
looks like i will need to strip damm thing down again..
if anyone has a few minutes , can you advise best way to get to diverter-valve…
i had app upside down and eased base up enought to access part..
havent a clue if this is correct..any help apprieciated…..ally
- You must be logged in to reply to this topic.