- This topic has 5 replies, 3 voices, and was last updated 16 years, 11 months ago by
.
-
Posts
-
Model is a T522VW. All of the manuals, Partfinder and even other official parts listings for this are incorrect.
I need the white, plastic latch cover. It is shown as a 1603063 on Partfinder but that is wrong. That is a curved latch plate and the one on this machine I need is the slightly smaller flat one. It is not a 1700954 either.
I just can’t seem to find the correct part number but I have had one or two of these in the past.
Anyone got one they can read the number off for me please.
Jim.
Re: Hotpoint/Creda flat latch plate cover
This latch plate fits a WM51, Jim; but I can’t find the gen part number on Connect. You should be able to find it on that model number though…..:wink:
HTH,
Steve.
Re: Hotpoint/Creda flat latch plate cover
I have been pouring over Partfinder for ages, as usual this one is for a mate. :rolls:
Came up with 1602476, 122mm plate now listed as NLA by Masterpart and 1603064 which is a 67mm latch plate but a different number to the curved 1603063, can’t find a picture though.
1603064 is listed as special order at MP, a bit of a bummer for my mate, I’m off on holiday on Monday for two weeks. 8)
Model WM51 on Partfinder only shows the earlier, 1602395 metal latchplate which is for the pecker type door lock. It shows the earlier type door mechanism but the later 1602390 bi metal interlock, totally incompatible, and we pay through the nose for Partfinder. :rolls:
Jim.
Re: Hotpoint/Creda flat latch plate cover
WM52P is definately fitted with that striker plate. Can’t see a part number on the one here on my desk….only 016/4393. 😕
Steve.
- You must be logged in to reply to this topic.