- This topic has 2 replies, 3 voices, and was last updated 16 years, 10 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
This machine will drain for about a minute, then start to fill for about 20 seconds. Timer then clunks all the way round to stop. It has a flow meter and an auxillary pcb. I presume that this is a fill detection issue, so pcb or flowmeter/matrix assembly?
Ta,
Chris.
Re: Beko D3421FS Dishwasher
Chris, I’ve got one with exact same problem, I’ve tried everything on it as its under warranty, PCB, Flow Meter, Timer and NTC but still wont work correctly, its probably going to be written off but if I have to go back I will let u know, I reckon it could be something to do with wiring loom or maybe PCB is not getting correct signal from somewhere.
As usual no tech info from Beko just parts diagrams :rolls:
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.