hotpoint wt940/1puc washing machine

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › hotpoint wt940/1puc washing machine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 3, 2009 at 9:31 pm #46191
    ebbo
    Participant

    hi, i have owned the above machine for 18months now, it has just started running the complete wash cycle but when its 1min from the end it then starts the spin cycle again and keeps repeating it?

    i have checked the pump/filter and hoses (for blockage) and the machine appears to be removing all excess water.

    there are no fault codes.

    not sure what to check next.

    Thanks

    June 3, 2009 at 11:34 pm #288500
    Penguin45
    Participant

    Re: hotpoint wt940/1puc washing machine

    Nope, pcb is having a fissy fit. Pay The Indesit Company £99.85 and get the pcb replaced. If you really want to, of course.

    Penguin45.

    June 4, 2009 at 5:53 pm #288501
    ebbo
    Participant

    Re: hotpoint wt940/1puc washing machine

    cheers, confirmed the answer i didnt want to hear, i will see how long wifey will put up with turning it off at end of cycle – then get it sorted.

    thanks again for your help.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.