Indisit DI 620 door lock problems

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indisit DI 620 door lock problems

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 3, 2009 at 10:14 pm #46192
    Soapy
    Participant

    After a couple of years of sterling service, one of the screws that holds the chassis to the underside of the work top has come loose. This made the door closing to start the washing cycle become progressively harder and harder to start until it stopped working completely.

    The switch seems loose as if a holding spring or the pivot mechanism has come adrift. If a screwdriver is used the holding claw can be rotated and a click as if a microswitch has operated can be heard.

    If the door is held under pressure, the machine will carry on the cycle as per normal, but there is a slight leak and if the door is opened it carries on running, not stopping like it used to.

    Any basic ideas please anyone to overcome this problem?

    Regards

    Paul.

    June 3, 2009 at 11:29 pm #288502
    Penguin45
    Participant

    Re: Indisit DI 620 door lock problems

    If the casing is twisted, the door will not want to close. Never mind the top of the machine, get the plinth off and raise the adjustable feet to square it up. If you’re still struggling, a new latch mechanism may be required.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.