Servis M6753W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Servis M6753W

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 18, 2009 at 4:07 pm #46473
    geoffmackay
    Participant

    Part number for key pad front top module please

    Thanks Geoff

    June 18, 2009 at 6:28 pm #289570
    Washman
    Participant

    Re: Servis M6753W

    Hi

    Part no 502058500 pcb , all part no for Servis electronics are printed on pcb’s.
    332080300 push buttons
    354044300 button holder
    Mike

    June 18, 2009 at 6:40 pm #289571
    geoffmackay
    Participant

    Re: Servis M6753W

    Yeah thats the pcb. Are they pre programmed or do i need to get hold of a Servis PDA to program it once fitted?

    Geoff

    June 18, 2009 at 8:15 pm #289572
    Dales-Electronic
    Moderator

    Re: Servis M6753W

    Last three numbers on the main module if not 203 are preprogrammed.

    June 18, 2009 at 8:26 pm #289573
    geoffmackay
    Participant

    Re: Servis M6753W

    So just to confirm i need to check the main module for a number that doesnt end 203. It is the facia board that gets programmed?

    Thnks Geoff

    June 18, 2009 at 9:16 pm #289574
    robbo1973
    Participant

    Re: Servis M6753W

    or 103 but they are really rare.

    June 19, 2009 at 6:09 am #289575
    Dales-Electronic
    Moderator

    Re: Servis M6753W

    If the last three on the main board are 103 or 203 then the programs are held on the facia board which reprograms the bottom main board when this is changed. If the facia board is faulty then you need a Servis PDA to reprogram it. If the board is not 546089203/103 then the board is preprogrammed. You then just change it, as mentioned earlier make sure you check the button keypad (facia) too as these have a habit of jamming and also causing the leds to flash

    June 20, 2009 at 11:39 am #289576
    geoffmackay
    Participant

    Re: Servis M6753W

    Thanks for your help guys

    Geoff

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.