SKT5102GB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SKT5102GB

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 19, 2009 at 10:19 am #46487
    aclarke
    Participant

    Got this Bosch Dishwasher to look at, it don’t pull in no water only the motor humming all the time, please any ideas were to start looking on this one
    many thanx

    June 19, 2009 at 6:05 pm #289612
    nomadPaul
    Participant

    This is a tabletop dishwasher…sounds like its the pump running due to water in base operating the flood protection system maybe ? Thats where i’d start mate .

    June 19, 2009 at 6:49 pm #289613
    aclarke
    Participant

    Re: SKT5102GB

    Cheers had look the base is dry no water inside,just the pump/motor runnin all times any other ideas and yes it is tabletop dishwasher

    June 19, 2009 at 7:03 pm #289614
    Penguin45
    Participant

    Re: SKT5102GB

    Which pump? Or is it both?

    Chris.

    June 19, 2009 at 8:46 pm #289615
    aclarke
    Participant

    Re: SKT5102GB

    Pump-circulating

    June 19, 2009 at 9:04 pm #289616
    Penguin45
    Participant

    Re: SKT5102GB

    Presumably thinks it’s full? P/sw perhaps. Mechanical timer, so no electronics to worry about.

    Chris.

    June 19, 2009 at 10:13 pm #289617
    nomadPaul
    Participant

    I have had a prob where the pressure switch ‘sump’ had blocked but this caused the appliance to overfill rather than run empty ….maybe your machine problem has the opposite symptons ?

    June 20, 2009 at 9:47 am #289618
    leavemetogetonwithit
    Participant

    Re: SKT5102GB

    Pressure switches can get blocked in either position. If you pull off the hose and hear a click (applies to old p/sw’s only, not new analogic ones) then it was probably blocked in the full position.
    :lesson:
    Mike.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.