LG washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG washer dryer

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 22, 2009 at 4:47 pm #46547
    Grendal
    Participant

    Hi got an LG washer dryer model no wd 12126Rd that coming up with a fault code of d e which is supposed to mean door error. 😕
    When you put the machine on a spin the door locks and the drain pump runs for approx 30 secs then you get the error d e. I have meggered all the heaters and nothing is showing as faulty. The customer said that it tripped the rcd when it went faulty, it has a direct drive motor on it.
    Not sure if its a pcb prob or a component failure any help would be most appreciated

    Thanks


    Lucky Goldstar

    June 23, 2009 at 7:08 am #289940
    funkyboogy
    Participant

    Re: LG washer dryer

    d.e….. drum error , you need to change stator.
    sensor on stator thinks theres a fault with drum??
    had a few

    ally

    June 23, 2009 at 11:33 am #289941
    Grendal
    Participant

    Re: LG washer dryer

    ty very much for that would explain the rcd tripping as well 🙂 🙂

    June 23, 2009 at 6:47 pm #289942
    funkyboogy
    Participant

    Re: LG washer dryer

    cheers

    ally

    June 23, 2009 at 8:29 pm #289943
    PGS
    Participant

    Re: LG washer dryer

    Change the HALL sensor first. 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time its this at fault

    June 25, 2009 at 3:08 pm #289944
    Grendal
    Participant

    Re: LG washer dryer

    Just to let you know been back to this today turned out it was the pcb most odd

    June 25, 2009 at 7:29 pm #289945
    funkyboogy
    Participant

    Re: LG washer dryer

    these can be a bit of a mine field.. if its an insurance job we normaly order pcb and stator..

    lg tech state if little red led is lit on pcb , then pcb should be ok ……take that with apinch of salt.

    ally

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.