BEKO WMA745W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO WMA745W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 25, 2009 at 12:28 pm #46620
    Vaderman77
    Participant

    Hello there.

    Anybody know of of any configuration procedure required for a BEKO WMA745W?

    I am going back to a problem armed with a main module. The problem is the rinse inlet valve will not fire. The valve is o.k. and continuity to the board is o.k.

    Main wash action and drain is all o.k., so a pump fault on a safety circuit can be ruled out, only option left is the main board, which I now have, but just wanted to check on any known configuration procedure, before starting.

    Thanks,

    Mike

    June 25, 2009 at 1:11 pm #290180
    helo_75
    Participant

    put board on, test it

    they come programmed

    June 25, 2009 at 1:26 pm #290181
    Vaderman77
    Participant

    Re: BEKO WMA745W

    Cheers. Many thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.