- This topic has 2 replies, 3 voices, and was last updated 16 years, 9 months ago by
.
-
Posts
-
Hi.. Im having problems with this d/washer… it is getting stuck in the cycle and just keeps running for hours unless turned off.
I have replaced the timer as i could not find any blockages and it is heating lovely… no fault found when im at customers, fills and drains ok when timer advanced. There is a push button assembly but i assume thats just a programme selector? Any ideas please guys??????
Re: neff S4340X0GB/20 sticking in cycles!!!
Have you checked for broken wires in the door loom?
or is it getting too hot and just cycling on the overheat thermostat?
Steven
Re: neff S4340X0GB/20 sticking in cycles!!!
yep i agree with steve, if there are no broken wires in the door loom (usually the thin wire returning from the thermostat). then carry out a temperture check, if it is getting too hot the toc will keep operating on and off keeping it stuck at a constant high temp and not advancing the timer. seen a good few of these on neff and bosch, look both sides of that loom as often the other wires are breaking as well.
- You must be logged in to reply to this topic.