Hotpoint WF630P Heater

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WF630P Heater

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 28, 2009 at 10:44 am #46674
    nickneff
    Participant

    Hi,

    Have a problem with my Hotpoint WF630P Washing Machine.

    The machine flashes F-03, sometimes changing to test. It has been suggested that the problem lies with the Heater, Thermistor or the PCB.

    The Heater Element reads 29 ohms and the Thermistor terminals are open circuit. ( I presume the Thermistor is the unit between the element terminals ).

    Could I assume the Thermistor is faulty ? If so is it available separately or as part of the Heater and could anyone provide a link for the best place to buy one.? or could the fault lie elsewhere?

    Thanks

    June 28, 2009 at 11:44 am #290476
    Penguin45
    Participant

    Re: Hotpoint WF630P Heater

    Thermistor should give a reading high kOhms – check the ranging on your test meter first.

    Spare part, if required, is the heater assembly – HERE.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.