akz145 oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › akz145 oven

Viewing 15 posts - 1 through 15 (of 18 total)
1 2
  • Author
    Posts
  • July 1, 2009 at 1:09 pm #46752
    adv
    Participant

    cus says had power cut now oven wont come off stop on dispaly when buttons pushed any ideas ta?

    July 1, 2009 at 1:31 pm #290763
    gav28
    Participant

    Re: akz145 oven

    had one last week timer button broke

    July 1, 2009 at 1:36 pm #290764
    adv
    Participant

    Re: akz145 oven

    button seems an feels its ok. can feel it hitin board in side?

    July 1, 2009 at 1:41 pm #290765
    gav28
    Participant

    Re: akz145 oven

    so if you acn hear it click could still be timer button as there is a little board where the button is or main board

    July 1, 2009 at 2:03 pm #290766
    adv
    Participant

    Re: akz145 oven

    yeh can here it click

    July 1, 2009 at 4:02 pm #290767
    adv
    Participant

    Re: akz145 oven

    wats best way to suss wat parts gone. do u start wi replacing 😆 the cheapest lol

    July 1, 2009 at 4:10 pm #290768
    gav28
    Participant

    Re: akz145 oven

    yes start with timer button

    July 1, 2009 at 5:36 pm #290769
    DentedPorsche
    Participant

    Re: akz145 oven

    Hiya,
    Make sure the controls are at the off position before turning the power back on.
    Press the button to move the cursor to the bottom right of the screen then set the time.

    Pressing the button won’t do anything if the selector isn’t at Off.

    Unplug the front controls from the main board and plug them back in again. Have had this work before.

    You could also try hard configuring the board (if it’s the one that needs configuring when replaced) by cutting the resistors according to the Service number on the appliance.

    HTH
    Brian

    July 1, 2009 at 8:13 pm #290770
    adv
    Participant

    Re: akz145 oven

    yeh read instructions has to be o to set nowt happening tho 😳

    July 1, 2009 at 9:02 pm #290771
    DentedPorsche
    Participant

    Re: akz145 oven

    Hiya,
    Try hard configuring the pcb. I had one today the same, cut the resistors and away it went.

    HTH
    Brian

    July 1, 2009 at 9:10 pm #290772
    adv
    Participant

    Re: akz145 oven

    dont no how to that mate?

    July 1, 2009 at 11:00 pm #290773
    Alanj
    Participant

    Re: akz145 oven

    Hi adv
    If you send me an e-mail address I can send you some info.

    Alan

    July 17, 2009 at 3:49 pm #290774
    snig
    Participant

    Re: akz145 oven

    Hi, i’ve the same fault on the same model oven. Following a power cut display reads stop and will not move on to set time or do anything!. Would luv to know how you resolved it , and why it happens ? Paul

    July 17, 2009 at 4:31 pm #290775
    Alanj
    Participant

    Re: akz145 oven

    Hi snig,
    send me an e-mail address and i’ll sort you out.

    Alan

    July 17, 2009 at 4:41 pm #290776
    adv
    Participant

    Re: akz145 oven

    didnt fixed it 😳

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 18 total)
1 2
  • You must be logged in to reply to this topic.