- This topic has 2 replies, 2 voices, and was last updated 16 years, 9 months ago by
.
-
Posts
-
Guys,
Went to look at a Bosch SGS4332GB/17 dishwasher the other day, when a cycle was selected the machine initially fills before immediately emptying. The machine then fills empties and so on.
After opening up the side of the machine there was no sign of flooding. I checked the board and find signs of a blown component and sent it off to QER for repair. After refitting the fixed board the machine continues to fill and empty on start up. Resetting the machine has no effect, the only other thing I observed was that after a minute or so of filling and emptying the cycle appeared to commence, however with little water in the machine it didn’t operate correctly.
Any ideas of what the problem might be would be appreciated.
Mark
Re: Bosch SGS4332GB/17 Dishwasher
take off left hand side panel and watch the red float switch as its filling, if its bobbing up and down its because there is a blockage in that plastic vessel. take it all apart and give it a good clean up. its part of the anti flood system.
- You must be logged in to reply to this topic.