whirlpool awm337 sticks on rinse cycle

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › whirlpool awm337 sticks on rinse cycle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 8, 2009 at 9:38 am #46904
    yandownie
    Participant

    hi
    our whirlpool awm337 washing machine sticks on the rinse cycle,ive checked the drain and its ok

    i tried the washer last night on a 40degree wash and it completed fine

    when i tried a 50 degree wash this morning, again stuck on the rinse cycle.if i press the start button it carries on with the rinse then stops again
    any ideas appreciated

    thanks

    July 8, 2009 at 1:12 pm #291345
    bzz67
    Participant

    Re: whirlpool awm337 sticks on rinse cycle

    does it stop full of water or empty!, if full it could be an intermittent drain fault, possibly something floating around in the pump. pump motor can also become intermittent.

    July 8, 2009 at 5:14 pm #291346
    yandownie
    Participant

    Re: whirlpool awm337 sticks on rinse cycle

    it had some water in it,when i pressed the start button it continued to rinse etc and finished the wash.this happens only on 60 and 50 degree washes if that has any relevance.it washes without interuption on a 40 wash.
    i tried another wash ,it stopped again during the rinse cycle,i removed front drain cover and manually drained the water as i did this the machine started to top up with cold water but wouldnt carry on doing the rinse untill after the start button was pressed.hope this helps?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.