servis pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › servis pump

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • July 9, 2009 at 3:41 pm #46936
    adv
    Participant

    servis m6601s drain pump connect want £35 plus vat an postage. any wer else cheaper bit pricey? 😳

    July 9, 2009 at 4:08 pm #291474
    robbra
    Participant

    Re: servis pump

    You can screw a Plaset or Askoll to the flanges if you are careful and use some sealant

    July 9, 2009 at 9:19 pm #291475
    leavemetogetonwithit
    Participant

    Re: servis pump

    The one on connect definitely looks like it has a toc. Best make sure replacement also does. Masterpart’s UN51207 for example. Ah blue spot; maybe ZN51102?
    Mike.

    July 9, 2009 at 9:52 pm #291476
    aqualectric
    Participant

    Re: servis pump

    PMP 888 from Connect gives you an Askoll pump with a choice of screw on pump chambers – one of which is a Servis / Whirlpool one. Around £7 + VAT. 😉

    Steve.

    July 9, 2009 at 10:15 pm #291477
    adv
    Participant

    Re: servis pump

    ta

    July 10, 2009 at 6:57 am #291478
    adv
    Participant

    Re: servis pump

    will the pmp888 def fit this machine? no filter a see? 😆

    July 10, 2009 at 7:01 am #291479
    Dales-Electronic
    Moderator

    Re: servis pump

    Is your origninal a screw on or a snap on pump?

    July 10, 2009 at 7:15 am #291480
    adv
    Participant

    Re: servis pump

    to bolts under neath

    July 10, 2009 at 11:00 am #291481
    leavemetogetonwithit
    Participant

    Re: servis pump

    I think Dales might mean how does the housing/filter fit to the pump motor? Is it three screws or bayonet?
    Mike.

    July 10, 2009 at 11:24 am #291482
    adv
    Participant

    Re: servis pump

    no its a twist on . bit like the cheapy straight thru servis pump.

    July 10, 2009 at 12:13 pm #291483
    leavemetogetonwithit
    Participant

    Re: servis pump

    PMP777 is a bog standard plaset bayonet fit but probably doesn’t have a toc. However, you might be able to swop the stators round if the old one has a toc. and is still intact.
    Mike.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.