Smeg DWI 710 E1

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Smeg DWI 710 E1

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • July 11, 2009 at 7:42 am #46965
    Harp
    Participant

    Machine has only the first LED flashing (rinse cycle extreme L/H side) and when door is opened it beeps twice . Can’t change program or reset program. Any ideas ? Thanks

    July 11, 2009 at 8:33 am #291761
    Bill
    Participant

    Re: Smeg DWI 710 E1

    Harp

    I cannot find a fault code to what you have told us, so all I can think is that the module has gone down!

    Bill Ellis :scot:

    July 11, 2009 at 10:40 am #291762
    Harp
    Participant

    Re: Smeg DWI 710 E1

    Thanks for reply …. Ive tried doing the reset but it wont work either … if its the module then this would be the second one replaced … last one was a couple of years ago and then it was about £120 🙁

    the Module is the PCB isnt it ? (forgot to mention that)

    July 11, 2009 at 11:22 am #291763
    Bill
    Participant

    Re: Smeg DWI 710 E1

    Harp,

    Before you go buying a replacement, try firstly unplug the machine and remove the module and then refit and try the machine. It could be just a BAD connection.

    Bill Ellis :scot:

    July 11, 2009 at 1:26 pm #291764
    Harp
    Participant

    Re: Smeg DWI 710 E1

    Ok Bill I’ll give that go thanks

    July 11, 2009 at 1:50 pm #291765
    Harp
    Participant

    Re: Smeg DWI 710 E1

    Hi Bill upon removal of the unit (modual) and inspection I could see the tell tale sign on a burnt board (PCB) . So how much these going for now ?

    Thanks again.

    July 11, 2009 at 2:51 pm #291766
    Bill
    Participant

    Re: Smeg DWI 710 E1

    Harp,

    If you can wait untill Monday I will get the wife to find out for you.

    Bill Ellis :scot:

    July 11, 2009 at 3:40 pm #291767
    Harp
    Participant

    Re: Smeg DWI 710 E1

    No problem Bill thanks again .

    July 12, 2009 at 11:36 am #291768
    Harp
    Participant

    Re: Smeg DWI 710 E1

    ok module number on my burnt board is 16010011510 Ive been offered a board that looks the same but part number is slightly different would it be ok? Other part number being offered is: 16010011110

    Thanks

    July 13, 2009 at 11:02 am #291769
    Harp
    Participant

    Re: Smeg DWI 710 E1

    Any luck Bill ?

    July 13, 2009 at 4:48 pm #291770
    Harp
    Participant

    Re: Smeg DWI 710 E1

    Anyone else know about the different part number on the module ? thanks

    July 13, 2009 at 9:06 pm #291771
    Penguin45
    Participant

    Re: Smeg DWI 710 E1

    Board code is meaningless. Repairers work to manufacturers part numbers.

    Penguin45.

    July 16, 2009 at 12:16 pm #291772
    Harp
    Participant

    Re: Smeg DWI 710 E1

    £33 and board in and machine running 🙂

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.