Hotpoint 1603557 module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint 1603557 module

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 14, 2009 at 4:49 pm #47052
    iadom
    Moderator

    Possible question for Tony at EMW. 😉

    I fitted a new 1603557 module from stock to an FEW12 (cold fill) today.

    Fault was door not locking.

    Looking at the price of this particular module new 😯 I thought I would send it off to EMW to have it repaired.

    The config codes for this module allow you to program it for H&C or C fill only.

    However, the displaced module has a large white label with 162001211100 COLD FILL ONLY on it.

    Does this mean that if I had this module repaired I would not be able to use it in a hot & cold fill machine?

    Jim.

    July 21, 2009 at 9:43 pm #292112
    Tony_EMW
    Participant

    Re: Hotpoint 1603557 module

    No. It can be configured for h&c or just cold. The circuitry is there on all boards for all the valves. The label just indicates the way it has been set up at the factory. Tony

    July 21, 2009 at 9:47 pm #292113
    iadom
    Moderator

    Re: Hotpoint 1603557 module

    Thanks for that info Tony. 8)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.