Beko DE3542 FW

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DE3542 FW

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 15, 2009 at 11:16 am #47083
    DDDave
    Participant

    Looking for suggestions on this dishwasher please. The machine fills and stops, there is no power from the module to the wash motor. Motor, thermister, element all test ok. It will drain when reset. I replaced the module but its still the same.
    Help !!
    Dave

    July 15, 2009 at 7:23 pm #292255
    leavemetogetonwithit
    Participant

    Re: Beko DE3542 FW

    Does it have a flowmeter?
    Mike.

    July 15, 2009 at 10:09 pm #292256
    DDDave
    Participant

    Re: Beko DE3542 FW

    leavemetogetonwithit wrote:Does it have a flowmeter?
    Mike.

    Hi Mike.
    I dont know , I couldnt find a pressure switch so maybe it does.
    Dave

    July 15, 2009 at 11:17 pm #292257
    leavemetogetonwithit
    Participant

    Re: Beko DE3542 FW

    Flowmeters have been known to cause such problems. It’ll probably be behind left hand side panel near base. Try pinching up connector first and see if that makes a difference.
    Mike.

    July 15, 2009 at 11:28 pm #292258
    Penguin45
    Participant

    Re: Beko DE3542 FW

    Flow meter is at the botom of the fill matrix – there is no pressure switch. Somebody’s putting a lot of faith in their God.

    P/no 1729900100 if required.

    Chris.

    July 16, 2009 at 6:37 am #292259
    DDDave
    Participant

    Thanks for that guys. I will go have a look at it today and let you know.

    July 31, 2009 at 6:33 pm #292260
    DDDave
    Participant

    Well I finally got back to this one today. The customer has been away.The flow meter did the job. Thank you for the help.
    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.