Smeg FA550X

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg FA550X

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 16, 2009 at 11:47 am #47119
    Alanj
    Participant

    Hi Guys,
    above side by side fridge/freezer has a problem with the front display on the freezer door flashing in and out and clicking, the clicking speeds up when you open the freezer door. I have tried changing the back control module but there is no change. I also noticed a bit of ice build up inside the top of the freezer door and around the door of the ice maker. Are there any smeg experts out there with an answer? 😕
    Thanks in advance.
    Alan

    July 17, 2009 at 2:52 pm #292388
    Alanj
    Participant

    Re: Smeg FA550X

    No one out there got any ideas?

    July 21, 2009 at 9:27 pm #292389
    Alanj
    Participant

    Re: Smeg FA550X

    Anyone not on holiday?

    July 21, 2009 at 10:10 pm #292390
    eastlmark
    Moderator

    Re: Smeg FA550X

    If you have changed the rear board then it only really leaves the front one to try. (probably sould have gone for that first TBH and i under warranty would have changed both anyway) The ICE build up may mean the icemaker water supply needs adjusting down a touch.

    July 22, 2009 at 12:31 pm #292391
    Alanj
    Participant

    Re: Smeg FA550X

    Thanks for the reply mark, appliance is out of warranty. But was advised by Smeg that back board was most likely cause. It wasn’t, so that’s why I asked the question here. Smeg tech also inferred that ice could be down to defrost stats.

    Alan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.