- This topic has 2 replies, 2 voices, and was last updated 16 years, 8 months ago by
.
-
Posts
-
My Smeg STX 2 has just stopped with E7. (Instuction manual goes to E6). I have tried having a poke down the transfer pipe between the metering tank and the sump, but this hasn’t done any good.
The Smeg Service site suggests that it is a flowmeter or PCB problem. Unlike the STX1, the STX2 does not appear to have a flowmeter (?)
Machine does not appear to be pumping out.
My inclination would be to examine the drain pump. If this is a good idea, how do I get to it?
Any other ideas?
Please help!
Tony
Re: Smeg STX2 E7
😀
I seem to have fixed it all by myself!What the dishwasher was trying to tell me was that the draining pipe was blocked at the sink end with a plug of lard! According to the manual error code E6 would cover this :rolls:
For anyone stumbling across this thread, what I did was remove the cover below the door, release the drain pump which is held by one screw. Then remove the drain pipe and blow down it.
I suspect that the lard in question had originated in the sink and not the dishwasher.
Tony
- You must be logged in to reply to this topic.