- This topic has 7 replies, 4 voices, and was last updated 16 years, 8 months ago by
.
-
Posts
-
I have just booked a call in to look at the above model on Thursday, I have never been to one of these appliances and was hoping for a bit of an heads up. Basically the customer opened the door and there was a loud click as if the bulb had blown and then nothing, the appliance is totally dead, she has changed the fuse etc to no avail. Im thinking its probably blew the pcb?
Re: Samsung RSH1NBRS – SXS
There is a 6 amp 20mm fuse on the top main pcb (located on the top of the appliance) replace it with the standard 6.3 used in microwave ovens.
Re: Samsung RSH1NBRS – SXS
Nice one, is this a common fault? I have got some ceramic 20mm 6.3 are these ok. Forgive me but as i said a I havnt been to one of these before, the pcb is on the top of the appliance, is it easy to get to?
Re: Samsung RSH1NBRS – SXS
Is there a test programme on these appliances? Be handy to know if there was.
Re: Samsung RSH1NBRS – SXS
parts easy to get to.. take of module cover on top of f/f and you will see fuse..
ally..ps you wont need test prog. fairly common fault-caused by bulb failure.
Re: Samsung RSH1NBRS – SXS
look on the top of the cabinet and remove a big plastic cover that reveals two PCBs one a big mother the other a small one that the mains comes in to that is where the fuse is ,your ceramic 20mm 6.3A will do nicely
Lawrence
- You must be logged in to reply to this topic.