Candy Ribbon Cable

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Candy Ribbon Cable

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 29, 2009 at 3:39 pm #47415
    subs
    Participant

    Candy washer dryer CMD146.
    Im after the ribbon cable that runs from the little dry time pc board at front of machine down to the small module at bottom rear of machine.
    Part no if possible please.

    Thanks

    Subs

    July 29, 2009 at 5:02 pm #293392
    helo_75
    Participant

    hmmm

    11 way ?
    12 way ?

    theres a few cables listed.. none specific

    oh , and full 16 number serial number would help?

    July 29, 2009 at 7:14 pm #293393
    aqualectric
    Participant

    Re: Candy Ribbon Cable

    8, 11 12 and 16 way fitted to that machine. You will need to count the cables (Gias wouldn’t supply me until I counted the cables; and still got it wrong twice. 😈 )

    If you need a 16 way or an 8 way, I have both in stock new and unused for a CMD146. You can’t go by the model number or the ‘3100’ number – count the cables.
    PM your address if you want them.

    Steve.

    July 29, 2009 at 10:10 pm #293394
    subs
    Participant

    Re: Candy Ribbon Cable

    Thanks Guys!
    All i remember is its one of the wider ones. Looks like ill have to pay another visit and have a count.
    I may come back to you steve if you have what i need.

    Subs

    August 6, 2009 at 7:19 pm #293395
    subs
    Participant

    Re: Candy Ribbon Cable

    Needed 12 way cable so ordered from Gias.
    What turned up was “12 way cable connecter”, just the plastic pcb connector without any cable. Got onto Gias and after some tooing and throwing they said they would call me back after they had spoken to the “technical guys”. They later rung me back and said you can only get the ribbon cables by buying the whole wiring harness at £69. This cant be right surely?

    Subs

    August 7, 2009 at 1:09 am #293396
    aqualectric
    Participant

    Re: Candy Ribbon Cable

    The cables are available separately – but by the time I had what I needed, they had sent me several different sizes and lengths. Gias are unbelievably useless – if they don’t know what is fitted to their own machines, we have no chance. 😥 Best of luck!!

    Steve.

    August 13, 2009 at 1:29 pm #293397
    subs
    Participant

    Re: Candy Ribbon Cable

    Ended up repairing the damaged ribbon cable myself, as dealing with Gias was just too much hassle. Bit like micro surgery (i imagine). Machine is all working fine and customer is happy (landlord with a few propertys) and also aware of the problems with Gias so wont be buying Hoover again.

    Subs

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.