ise2 door interlock

Home › Forums › Manufacturer/WP/Insurer Specific Forums › ISE Trade Support Forum › ise2 door interlock

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 29, 2009 at 4:07 pm #47416
    scots
    Participant

    Hi

    Can anyone please sell me a door interlock for the ISE2

    Brian

    July 29, 2009 at 4:14 pm #293398
    don
    Moderator

    Re: ise2 door interlock

    Hi Scots

    This thread may help on Interlocks for the ISE2.


    HTH

    Don

    July 29, 2009 at 4:24 pm #293399
    scots
    Participant

    Re: ise2 door interlock

    Hi Don

    The link dont work?

    The reason I need int is that the machine according to cust doesnt stop at the end, says it pulses.

    I suspect the valve is briefly opening at the end of the prog.

    Having read through the ise forum it appears to be caused by the door int?

    Thanks anyway

    Brian

    July 29, 2009 at 10:00 pm #293400
    iadom
    Moderator

    Re: ise2 door interlock

    scots wrote:Hi

    Can anyone please sell me a door interlock for the ISE2

    Brian

    Sell you one, if you are an agent you should either have stock or be able to get one from ISE HQ free of charge. The ISE 2 range is still just under 2 years old so it should be still under warranty.

    You can use an INT51 (Hotpoint) pattern interlock from Qualtex, just don’t use a genuine Hotpoint/Indesit one, they will jam and you will be unable to open the door.

    Jim.

    July 29, 2009 at 10:28 pm #293401
    scots
    Participant

    Re: ise2 door interlock

    Thanks Jim

    Yes I suppose I am an agent, having sold them?

    Just having trouble getting the parts from Nicola, she cant find the registration docs of my customer. I cant allow my customer to have this delay as its still under 1 year old, so I am trying to source the interlock myself.

    Will try the INT51

    Thanks
    Brian

    July 29, 2009 at 10:33 pm #293402
    iadom
    Moderator

    Re: ise2 door interlock

    Ahh, I see, 8)

    The Masterpart one should also fit but some of them have very large screw holes and the original screws are too small.

    Jim.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.