Zanussie ZWX1605W stops during wash and rinses

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussie ZWX1605W stops during wash and rinses

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 29, 2009 at 5:14 pm #47421
    Bernie
    Participant

    Zanussie ZWX1605W stops during wash and rinses.

    If you select the normal 40 deg wash program it stops with these lights on, none are flashing. I fact it does not matter what program you select.

    I have checked the carbons and taco all ok there have had the PCB out cannot see and dry joints burn all looks ok have tightened the edge connectors, heaters ok.

    Any suggestions please

    Thanks Bernie

    July 29, 2009 at 8:02 pm #293415
    martinm
    Participant

    Re: Zanussie ZWX1605W stops during wash and rinses

    put it in to diagnostics see what code it gives you

    July 29, 2009 at 9:11 pm #293416
    neilsukwg
    Participant

    Re: Zanussie ZWX1605W stops during wash and rinses

    This range seem to be plauged with odd faults like this. Had to stop recommending Zanussi machines because of this model

    Just a thought, have you checked heater, motor for low insulation?

    Neil

    July 29, 2009 at 10:46 pm #293417
    roly16
    Participant

    Re: Zanussie ZWX1605W stops during wash and rinses

    Or broken wires

    July 30, 2009 at 10:53 am #293418
    Bernie
    Participant

    Re: Zanussie ZWX1605W stops during wash and rinses

    I had tested machine for low insulation but that was ok

    have just put machine through the test program again the only lights that we flashing were the start/pause and end lights this is what I got the other time and I thought that it had finished the test, is that a fault code?

    The one thing that it has done a couple of times is it has spun on wash.

    Bernie

    July 30, 2009 at 11:08 am #293419
    LightingElectrical
    Participant

    Re: Zanussie ZWX1605W stops during wash and rinses

    Check pump by substituition if reqd as have just done so on ZWX1606W. Pump was failing intermittently during wash/rinse. Couldnt seem to catch it in the act but finally did. On bench would fail to start three out of every ten times.

    Ron

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.