Servis Easilogic 1500 M6506s-01 Washing machine

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Servis Easilogic 1500 M6506s-01 Washing machine

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 30, 2009 at 10:59 am #47445
    hman205
    Participant

    I have a 1 year old Servis Easilogic 1500 M6506s-01 it has developed a fault where it resets when it attempts to move the drum during the wash cycle I replaced the Brushes but it still did it,

    The machine will run through its program if the belt is disconnected but when the drum is connected when attempting to agitate it cuts out and try’s again and again it will eventually move on to the next part of the programme but takes forever.

    I then tried a spin to empty the water out this works fine the machine pumps out and spins at 550 ~ 1500rpm with no problems

    Any help would be much appreciated

    July 30, 2009 at 11:27 pm #293500
    martinm
    Participant

    Re: Servis Easilogic 1500 M6506s-01 Washing machine

    sounds like a module fault

    July 31, 2009 at 7:35 am #293501
    hman205
    Participant

    Re: Servis Easilogic 1500 M6506s-01 Washing machine

    I contacted QER (Quality Electronic Repairs) with the Pcb numbers but they don’t recognise them

    they are 5460718004673450 on a small sticker
    and Mini cel 1400 546099200-03 on the big sticker on the front

    anybody have any idea’s of where to go from here im very good with a soldering iron so if its a component that needs replacing I would be able to do it.
    This would be more preferable than being without the machine for 2 weeks while I send the board away.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.