Whirlpool, no water to ice.

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Whirlpool, no water to ice.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 1, 2009 at 1:54 pm #47508
    Lewie
    Participant

    Hi all.
    I have a Whirlpool 20 RUD 3 fridge freezer with ice/water dispenser.
    We have recently been on holiday for two weeks.
    We came back and the ice dispenser has been messing about.
    First ice wasn’t coming out very good, the chute was blocked so I cleared that.
    Then the ice tray threw a lump of ice out whole. The block didn’t break into pieces, it looked like there was too much water in the tray?
    I then got a red triangle with a exclamation mark in it and the whole ice and crushed ice icons flashing from one to another.
    So I emptied all the ice out of the box an cleaned stuff.
    I had to turn the thing off to reset everything but now the water isn’t filling the ice tray.
    When I turn the ice off and back on it goes through the routine of tipping the tray a bit and the arm moves up and down but no water??
    There is water to the drinks part so the supply is fine.
    Any clues??
    Cheers.

    August 1, 2009 at 5:31 pm #293695
    Lewie
    Participant

    Re: Whirlpool, no water to ice.

    Scrap that, it’s sorted.
    For the record I think it went out of sync somehow.
    I manually filled the ice tray.
    It tipped it into the bucket then filled itself with water.
    Bingo.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.