- This topic has 2 replies, 2 voices, and was last updated 16 years, 8 months ago by
.
-
Posts
-
I have a problem with the detergent dispenser on my Bosch Logixx srs56a02gb/08 dishwasher and it will not open on any program. I have undertaken the following checks but the problem still persists.
1. I have checked the dispenser actuator for electrical resistance and is OK, but have also replaced with a new one.
2. I have checked the dispenser internally and the mechanical action is OK, i.e. the detergent door opens, and the rinse aid dispenser releases liquid if you manually push the actuator.
3. Have checked all the electrical connections form the dispenser to the control module and are all sound.
I can only conclude that it must be the control module at fault, has anyone got any other ideas what could be the cause of this problem.Re: Bosch Logixx srs56a02gb/08 Detergent Dispenser Fault
The logic is flawless. Check continuity from the pcb to dispenser to be doubly sure. If ok, pcb it is. For info, it’s usually the actuator which blows the pcb – cause and effect thing going on.
Penguin45.
Penguin45 wrote:The logic is flawless. Check continuity from the pcb to dispenser to be doubly sure. If ok, pcb it is. For info, it’s usually the actuator which blows the pcb – cause and effect thing going on.
Penguin45.
Thanks for the reply,
Continuity from the pcb to dispenser checks out OK. I have since opened the control module to look for any signs of PCB damage but all looks OK, but without any circuit information its difficult to know what’s going on. I assume it can now only be the control module at fault ?. Where is the best place to obtain spares.Thanks once again for your assistance.
- You must be logged in to reply to this topic.