Hotpoint d/washer FDW60

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint d/washer FDW60

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 10, 2009 at 5:44 pm #47694
    Gordy29
    Participant

    HEATER TESTS OUT OK ABOUT 28 OHMS .WHEN RUNNING IT GET,S HOT OK AFTER ABOUT 4 MINS ABORTS PROG THEN LIGHTS 2AND 4 FLASH. ANY ADVICE . THANK,S GORDY 29

    August 10, 2009 at 6:02 pm #294279
    iadom
    Moderator

    Re: Hotpoint d/washer FDW60

    Gordy29 wrote: ANY ADVICE .

    Yep, turn the CAPS LOCK off. 😉

    2+4 is not a recognised error code for this machine. 😕

    August 11, 2009 at 6:29 pm #294280
    loopey
    Participant

    Re: Hotpoint d/washer FDW60

    check wall socket is earthed , or m/c as earth continiuty , had this problem , drove me nuts , after finding loose earth pin wireing in socket

    phil

    August 14, 2009 at 5:09 pm #294281
    Gordy29
    Participant

    Re: Hotpoint d/washer FDW60

    Thanks loopey i,ve checked that. should have looked closer first time .its the4th and 6 th lights flashing. itflashes after about 20min,s but doe,s get hot.sorry about long time to reply. gordy 29

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.