Servis M6513S – cant pull the top off?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Servis M6513S – cant pull the top off?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 10, 2009 at 9:47 pm #47702
    flat4
    Participant

    i need to change the pcb but have fallen at the first hurdle! i cant get the top off!
    i’ve taken two screws off the back and then the back of the top lifts up but i cant see anywhere to release the front end of the top?
    does the top slide off or pull off? if slide, which direction, front or back?

    August 11, 2009 at 12:08 am #294298
    Penguin45
    Participant

    Re: Servis M6513S – cant pull the top off?

    Check that there are not two or three extra screws to undo in the back of the lid. Otherwise, it’s lift slightly and wiggle vigorously ’til it gives in.

    Penguin45.

    August 11, 2009 at 2:21 pm #294299
    Washman
    Participant

    Re: Servis M6513S – cant pull the top off?

    Hi

    There should be 2 bolts recessed into the back section of the top that go through to the front facia.Undo these and pull top towards the rear of machine.

    And unplug from mains first.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.