- This topic has 2 replies, 3 voices, and was last updated 16 years, 8 months ago by
.
-
Posts
-
Machine has E34 (through dignostics) intermittently coming up. About 30 seconds into fill the progress leds change from wash to drain, the machine display returns to 0 and the door unlocks. No blockages, but when I released the electronic switch the programme could be started again normally.
Not too sure about this one but I’m suspecting the electronic switch.
The other thing about this machine is that the board whines constantly, so could this be contributing to the fault 😕TC
Re: Zanussi ZWF1437w E34
pressure switch?
In the ukwg manual E34 is not listed but all the other E30s listed are pressure switch faults.
Not to sure about the whining though 😕 are you sure thats not your customer?
Re: Zanussi ZWF1437w E34
e34 fault listed as
Inconsistency between level on electronic
pressure switch and level on anti-boiling pressure
switch 2 (fault persists for at least 60 sec.).
possible suggested curespressure switch defective;
Electrical current leak between heating element and ground; Heating
element; Wiring defective;
Main board defective.
Water circuit;from lux disc
hope this helps
Dave
- You must be logged in to reply to this topic.